Compressor Belts

Model: 47576547001

Core Technical Specifications

Separation Precision: 0.01 μm submicron lubricant oil mist

Residual Oil Content of Outlet Compressed Air: ≤3 ppm

Separation Efficiency: 99.99%

Overall Dimension: OD 450 mm × Height 500 mm

Max Working Pressure: 16 bar / 232 PSIG

Continuous Operating Temperature: ≤110℃

Standard Service Life: 3,500–5,200 operating hours; mandatory replacement when differential pressure exceeds 0.8 bar

Initial Differential Pressure: ≤0.02 MPa

Key Product Advantages

Two-Stage Gradient Coalescence to Reduce Oil Consumption

Multi-layer gradient glass fiber medium fully captures ultra-fine oil mist generated by high-flow screw compression. Agglomerated liquid lubricant oil flows back to the compressor oil tank through the central oil return tube, significantly cutting oil consumption and stabilizing the cleanliness of downstream compressed air.

Low Initial Differential Pressure for Energy Saving

Large deep-pleated filtration area optimizes internal large-flow oil-gas flow channels to minimize pressure loss. Maintains stable low pressure drop under 24/7 full-load continuous operation, avoids increased motor load and extra power consumption caused by clogged separator core, lowering long-term factory electricity costs.

Ultra-Large Oil & Sludge Holding Capacity

Thick gradient depth fiber matrix stores massive coalesced lubricant oil, carbon sludge and metal wear debris, resists blockage from high-temperature aging oil, suitable for heavy industrial uninterrupted long-cycle production.

Heavy-Duty Anti-Corrosion Reinforced Structure

Thick galvanized steel protective mesh and high-temperature composite sealing gasket withstand long-term high-temperature oil-gas mixed environment. Effectively prevents filter medium rupture and fiber shedding to avoid secondary oil contamination of pipeline precision filters and terminal production equipment.

Working Principle

High-temperature high-pressure oil-gas mixture discharged from the screw airend penetrates the glass fiber filter medium from outside to inside of the separator core. Submicron oil mist particles collide and aggregate into large liquid oil droplets on the fiber surface. Oil sinks to the bottom of the separator by gravity and flows back to the compressor lubricating oil tank via central oil return pipe; low-oil clean compressed air flows out to refrigerated dryer and pipeline precision filter system.

Application & Industries

Widely applied in large machinery manufacturing plants, automotive electrostatic spraying workshops, packaging printing factories, textile mills, food sterile packaging, laser cutting equipment, pharmaceutical clean workshops and centralized factory large-flow compressed air supply stations.